P 150

KLINGELNBERG Precision Measuring Center


Cutting-Edge Technology for Maximum Safety and Precision

The fully automatic CNC-controlled P 150 precision measuring center is designed for the workpiece diameter range up to 1800 mm. The machine is used to inspect a wide range of cylindrical gear designs, as well as large bevel gearings and worm gears.


  • Fast and accurate measurement acquisition, combined with a high-precision workpiece turntable
  • A wide range of measurement tasks in a single clamping, suitable for coordinate, shape, gear tooth and roughness measurements
  • Versatile scanning 3D tracer head with digital measurement acquisition in all coordinate directions
  • High basic accuracy with low tolerances
  • Simple graphical programming environment and simple software operating concept
  • Tremendous time savings due to quick availability of measuring results
Range of Application
General Data
Module (min. – max.)

1 – 85 mm

Horizontal measuring range (rolling path X axis)

± 300 mm

Smallest/largest helix or lead angle

0°/90°

Gear outer diameter with rotatable leveling table

0 – 1,800 mm

Permissible test gear weight (max.)

8,000 kg

Vertical measuring range (Z axis)

1,200 (1,500, 2,000) mm

Gear seating diameter with rotatable leveling table

220 – 1,000 mm

Chart recording magnification

50; 100; 200; 500; 1,000; 2,000 x

Chart length magnification

0.5; 1; 2; 4; 5; 10; 20 x

Operating voltage

± 15% from the nominal voltage

Total connected load approx.

6,5 kVA

Compressed air connection

6 bar / 60 l/h

Measuring Accuracy in Observance of +20
Gear measurement according to VDI/VDE 2612 sheet 1 and 2 as well as 2613

Group I

Shaft measurement according to VDI / VDE 2617 sheet 2.1

U1 = 2 + L/250

Concentricity and axial runout according to DIN/ISO 1101

< 1 μm

General Machine Data
Net weight incl. standard equipment, approx.

16,300 kg

Machine dimensions incl. counterholder (L x W x H) approx.

4,020 x 2,485 x 4,120 mm

Range of Application
General Data
Module (min. – max.) 1 – 85 mm
Horizontal measuring range (rolling path X axis) ± 300 mm
Smallest/largest helix or lead angle 0°/90°
Gear outer diameter with rotatable leveling table 0 – 1,800 mm
Permissible test gear weight (max.) 8,000 kg
Vertical measuring range (Z axis) 1,200 (1,500, 2,000) mm
Gear seating diameter with rotatable leveling table 220 – 1,000 mm
Chart recording magnification 50; 100; 200; 500; 1,000; 2,000 x
Chart length magnification 0.5; 1; 2; 4; 5; 10; 20 x
Operating voltage ± 15% from the nominal voltage
Total connected load approx. 6,5 kVA
Compressed air connection 6 bar / 60 l/h
Measuring Accuracy in Observance of +20
Gear measurement according to VDI/VDE 2612 sheet 1 and 2 as well as 2613 Group I
Shaft measurement according to VDI / VDE 2617 sheet 2.1 U1 = 2 + L/250
Concentricity and axial runout according to DIN/ISO 1101 < 1 μm
General Machine Data
Net weight incl. standard equipment, approx. 16,300 kg
Machine dimensions incl. counterholder (L x W x H) approx. 4,020 x 2,485 x 4,120 mm

* Correction values in case of a deviating temperature as per preparatory letter.

Subject to changes.

The dimensions of the standard version are for orientation only. Swivel ranges for doors, operating panels etc. are not taken into account here. The final space requirement depends on the individual configuration of the machine.
P 150 Brochure English
(PDF, 3 MB)
1/10
*Compulsory field
Your local sales representative will be found below locations.
KLINGELNBERG AG
Binzmühlestrasse 171
8050 Zürich, Switzerland
Fon: +41 44 278 7979
Fax: +41 44 273 1594
KLINGELNBERG GmbH
Peterstrasse 45
42499 Hückeswagen
Fon: +49 2192 81-0
Fax: +49 2192 81-200
KLINGELNBERG GmbH
Industriestrasse 19
76275 Ettlingen, Germany
Fon: +49 7243 559-0
Fax: +49 7243 599-165
www.klingelnberg.com marketing@klingelnberg.com © 2019  KLINGELNBERG